home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The 640 MEG Shareware Studio 2
/
The 640 Meg Shareware Studio CD-ROM Volume II (Data Express)(1993).ISO
/
person
/
kws.zip
/
KWSREAD.ME
< prev
next >
Wrap
Text File
|
1992-01-14
|
3KB
|
62 lines
Welcome to KNITWARE (TM) Sweater Design.
This is Shareware release 1.10 January 1992.
from: Morningdew Consulting Services Ltd.
7604 Morningdew Rd., R.R. #5
Victoria, B.C. Canada
V8X 4M6 Phone: (604) 652-4097
This disk should contain the following files:
KWSREAD.ME This introduction
KWSINSTL.BAT Hard disk installation
KWS.EXE Program file
KWSUSER.DOC User manual
KWSORDER.DOC Registration and order form
KWS.HLP Help text
KWS.NDX Index to help text
KWS_SIZE.DAT Size and measurement data
KWS_NDL.DAT Needle sizes data
KWS_PATT.ORG, .DAT, .BKP Pattern data: original, user master, backup
KWS_DFLT.ORG, .DAT, .BKP Designer defaults data: original,
user master, user backup
To get started:
1. Floppy disk installation. Make a backup copy of this disk, to use
as your working disk. If you have two drives the same size, type:
DISKCOPY A: B: [Enter]
otherwise, type:
DISKCOPY A: A: [Enter]
If you have problems, see User Manual section 2.1.
2. Hard disk installation. Insert KNITWARE disk in floppy drive, type:
KWSINSTL X Y [Enter] (e.g. KWSINSTL A C)
where X is the floppy drive (usually A or B) and Y is the hard drive
(usually C). If you have problems, see User Manual section 2.2.
3. Try out the program. For floppy disk installations, put your working
disk in drive A:, type:
A: [Enter] then KWS [Enter]
To run from hard disk, type:
CD \KNIT [Enter] then KWS [Enter]
4. Print the user manual (it is 36 pages long). Insert the disk in drive
A:, turn the printer on, and type
PRINT A:KWSUSER.DOC -or- TYPE A:KWSUSER.DOC PRN [Enter]
If the screen displays NAME OF LIST DEVICE (PRN): press [Enter] again.
If your printer prints at 8 lines per inch (the document paging is too
soon), stop the printer and type PRINT /T [Enter] to cancel the print
job. When the printing has stopped, turn on the printer, type
MODE LPT1:80,6 [Enter] to set to 6 lines per inch, and
PRINT A:KWSUSER.DOC [Enter] again.
5. READ THE MANUAL!!! There's lots of good stuff in there, and it will
help you use the program more intelligently.
Enjoy, and may the knitting be with you!